Digital display hot air gun thermostat car foil baking gun baking hot shrink film heating hair dryer welding gun barrel

Digital display hot air gun thermostat car foil baking gun baking hot shrink film heating hair dryer welding gun barrel
  • Продавецrennstall.info
  • Список ценUS $28.43piece
  • Продажная ценаUS $28.43piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,9 (557)

Oписание продукта

16*16 Flash Dryer Silkscreen Printing Heating Heavy Duty Ink Curing T-shirt
 
This is a professionally built brand new flash dryer with Temperature Display or Electric Control 2 kinds. It has a 18x18" 16X 16" 18X24" 3 kinds of heating grid opening, wheels, and a standard 110v or 220V plug so there is no special wiring required. This unit can be raised or lowered from 30" to 48". It is very heavy duty. The temperature is over 400 degrees F at distance of 2 1/2" below the flash heating element. It can easily cure plastisol ink for silkscreen printing.

 

The unit is ultra heavy. It has a base diameter that is reasonable (about 38"). It can easily roll thru standard 32" door way.  We have a Ranar flash dryer. It is only about 2/3 the weight. It is much lighter so its base has to have a big diameter (over 50") to prevent it from tipping over. (see photo above ) This create quite a bit of inconvenience because we keep on tripping or kicking the Ranar flash unit while we are working on silk screen printing. This flash dryer base is compact and it will not tip over because it is heavy.
Application: It can easily cure plastisol ink for silkscreen printing, widely used in home offices and presses which leading the paper era.

 

Note: Notice the fusing fuse in a long time continuous period, rest for cool, and check it regularly. Reserve properly, for electrical components is attractive to dust. Clean it\'s platform regularly before use and after. This item takes approximately 5 minutes from initial turn on to stabilize temperature. There will be natural fluctuations in the temperature as you use the item.
 
 
s-l1600123679
 
Feature
 
    • 2 Year Guaranteed
    • Powder coated finish
    • 380-degree level swivel head
    • Capable of curing plastisol ink
    • Basic assembly tools included
    • Plugs into a standard wall outlet
    • Insulated for maximum efficiency
    • Heavy duty steel Bearing castors
    • With four universal locking casters, easy move.
    • Sturdy base with wheels for easy use
    • Sturdy design with powder coated housing to prevent rust.
    • Separated electrical control box keeps
    • Black powder coated steel welded frame
    • Secure handle for moving the dryer in production
    • 1700 Watt, on/off switch and over current protection
    • 2000 Watt Heating Element - It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.
    • Styrofoam padded on all sides and internally secured
    • Shrink wrapped parts in shipping box for safety in transit
    • Handle can be positioned front and center or on top of either front corner
    • Runs on standard 20 amp house circuit.
    • Adjustable height floor stand from 30" to 48"
    • Double Boxed for secure and rigid packaging
    • On/Off switch, no timer
    • Rotating and adjustable stand. Heavy duty steel construction.
    • Foundation is consistent with heating box, stable, saving-space and overcoming the flaw caused by traditional “十” that easily gets knock and stuck.
    • Easy operation: After well installed, connect the power supply and turn on the switch and then it will work automatically.
    • Easy assembly. With a few bolts you have a flash that\'s ready to be put to work.
 
Specifications
    • Swivel Head: 380-degree level
    • Input Power: 220V/50Hz
    • Adjustable height of floor stand: 30" to 48"
    • Warranty: 2 years
  • 16*16 Electric Control Box
    • Heating Area: 16" x 16"
    • Power: 1700 Watts
    • Minimum Height: 30"
    • Maximum Height: 48"
    • Shipped Weight: 60 lbs
    • Runs on standard 20 amp house circuit
    16*16 Temperature Display LCD
    • Heating Area: 16" x 16"
    • Max Temp: 200 degrees Celsius
    • Minimum Height: 30"
    • Maximum Height: 48"
    • Shipped Weight: 53 lbs
    • Base Dimensions: 38" x 38"
    • Top Dimensions: 29" x 19"
    • Average Current Draw: 13 Amps
    • Maximum Current Draw: 16.5 Amps
    • Average Power Usage: 1350 Watts
    • Assembled Dimensions: 38" x 38" x 48"
    • Suggest Temp Range: 140-180 degrees Celsius
    18*18 Electric Control Box
    • Heating Area: 18" x 18"
    • Minimum Height: 30"
    • Maximum Height: 48"
    • Shipped Weight: 53 lbs
    • Base Dimensions: 38" x 38"
    • Top Dimensions: 29" x 19"
    • Average Current Draw: 13 Amps
    • Maximum Current Draw: 16.5 Amps
    • Average Power Usage: 1350 Watts
    • Maximum Power Usage: 2000 Watts
    • Assembled Dimensions: 38" x 38" x 48"
    • Max Temp: 200 degrees Celsius
    • 1700 Watts, on/off switch and over current protection
    • Suggest Temp Range: 140-180 degrees Celsius
    18*18 Temperature Display LCD
    • Heating Area: 18" x 18"
    • Base Dimensions: 38" x 38"
    • Top Dimensions: 29" x 19"
    • Minimum Height: 30"
    • Maximum Height: 48"
    • Shipped Weight: 53 lbs
    • Assembled Dimensions: 38" x 38" x 48"
    • Max Temp: 200 degrees Celsius
    • Suggest Temp Range: 140-180 degrees Celsius
    • Average Current Draw: 13 Amps
    • Maximum Current Draw: 16.5 Amps
    • Average Power Usage: 1350 Watts
    • Maximum Power Usage: 2000 Watts
    18*24 Electric Control Box
    • Heating Area: 18" x 24"(45 x 60cm)
    • Power: 2000 Watts
    • Minimum Height: 24"
    • Maximum Height: 43"
    • Shipped Weight: 75 lbs
    • 18*24 Temperature Display LCD
    • Heating Area: 18" x 24"(45 x 60cm)
    • Power: 2000 Watts
    • Minimum Height: 24"
    • Maximum Height: 43"
    • Shipped Weight: 75 lbs
 
Package Content
    • 1 Set of 1700W Or 2000W Flash Dryer With Temperature Display Or not
    • 1 X Head
    • 4 X Base Leg
    • 1 X Below Support Bar
    • 1 X Top Support Bar
    • 4 X Caster
    • 2 X Handle
    • 8 X  Screw For Base Legs
    • 1 X  Base Leg Support Plate

 

COMPANY INFORMATION

VEVOR Machinery Equipment Co., LTD. mainly engaged in cross-border business for 10 years. At present, the company operates more than 10000 kinds of products with more than 200 employees. We are dedicated to offer you an unrivalled choice of products with lowest price and best quality. 

More important, we own ten more warehouses in the world, which located in 3 continents.There are logistics warehouses in Los Angeles, Germany etc. 

Our factory locates in 215417,Taicang, Jiangsu, China. And our sales branch company locates in the Shanghai. Welcome to visit our company.   

 

-1209_07.jpg